Auto Mfr100+ Automatic Rotorless Rheometer Mdr Moving Die Rheometer

• Warranty: 1 Years
• Accuracy Grade: 0.01
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Digital
• Control: Computer Control
• Model NO.: Auto MFR100+
• Weight: 100-500Kg
• Power Source: AC220V
• Oscillation Frequency: 1.67Hz
• Sample Guide Frame: up to 5 Samples Can Be Placed
• Sample Volume: About 4.5cm3
• Specification: 65cmx80cmx150cm
• Trademark: hengyu
• Origin: China

Product Description

 

Product Description

 

The rotorless rheometer has been widely used in the research and development and quality control of rubber products to detect rubber properties. Auto MFR100+ automatic rotorless rheometer is widely used in quality control in the production of rubber products, suitable for testing a large number of rubber samples.
Executive standard:
ASTM D 5289, ASTM D6204 Part A, GB/T 16584, etc.
Features:
Automatic sample feeding
Automatically test according to the set program
Automatic unloading after test
rich data points
Closed cavity design
Excellent repeatability and reproducibility
accurate temperature control
Intuitive man-machine interface displays curves and data
built-in processing system
Network interface facilitates information management
Easy maintenance, safe and reliable
Optional frequency scanning test module can further investigate the processing characteristics of rubber materials
Optional variable temperature simulation vulcanization test can truly reflect the vulcanization characteristics of thick products
The optional multi-strain angle switching system can improve the sensitivity of various rubber test data
Optional pressure test module can test the vulcanization characteristics and pressure changes of foam rubber at the same time
 

Product Parameters

 

 

Strain angle: standard: ±0.5°; optional: ±0.2° or ±1.0°
Oscillation frequency: 1.67Hz
Film conveying system: film specification: nylon film roll (width 100 mm) can be tested about 3500 times;
Sample guide frame: up to 5 samples can be placed;
Sample volume: about 4.5cm3
Temperature Control: Microprocessor Control
Temperature range: room temperature to 200°C
Temperature resolution: 0.01°C
Temperature control accuracy: ±0.1°C
Accuracy: ±0.2°C
Temperature overheating: 0.4°C less than the set point
Temperature recovery speed: <45 seconds
Heating rate: less than 5 minutes at 20°C to 190°C
Data type: composite torque S*, elastic torque S', viscous torque S", hysteresis loss TanDelta, composite modulus G*, elastic modulus G', viscous modulus G", dynamic viscosity η, arbitrary scorch time point tsx , any curing time point TCx
Range: 0~200dNm, lb-in
Measurement accuracy: 0.01dNm, lb-in (optional 0.001)
Test type: standard vulcanization and pressure vulcanization test (for styrofoam testing)
Calibration: Torque Spring Calibration
Embedded system: Embedded data processing system
Interface: Fast Ethernet X1, USB 2.0X2, RS232X1
Power supply, gas source: 220VAC±10%, 7A, single-phase gas source pressure not less than 0.44MPa (4.5kg/cm2)
Size: Width: 68cm, Height: 116cm, Depth: 45cm
Weight: gross weight: about 200kg, net weight: about 150kg
Package size: length x width x height: 65cmx80cmx150cm

Application fields:
Research and development and quality control of rubber and plastic products. Auto MFR100+ automatic rotorless rheometer is widely used in quality control in the production of rubber products, suitable for testing a large number of rubber samples.