| Customization: | Available |
|---|---|
| Warranty: | 1 Years |
| Power Source: | AC220V 50Hz |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Meet the standards: GB, ISO7500/1, JJG475-88, ASTME4, DIN5122, JISB7721/B7733, EN1002-2, BS1610, CNS9471/9470
This model is widely used in various materials such as rubber and plastic, footwear, leather, clothing, textiles, insulators, terminals, etc., to test its tensile, tearing, peeling, bending and other material research and development, inspection and testing , full-featured and widely used.
Software Features:
1. Software environment: HY-V software package under WindowsXP platform in Chinese and English.
2. Language selection: Simplified Chinese, Traditional Chinese, English and other language interfaces can be switched freely during operation, which greatly facilitates the use of the operator
3. Unit conversion: common force, displacement and energy are all available and can be freely converted.
4. Basic functions: can calculate and list data graphics: with basic parameters of material testing machine:
* Yield point
* 0.2% off set
* Yield strength
* Tensile strength
* Elongation
* Energy absorption
* Maximum value
* Fracture value
*Deformation
* Average value
* Contrast graphics, etc. 20 model parameters.
5. Various curve display modes: stress-strain, force-displacement, force-time, strength-time and other curve modes.
6. Use of data: use database to manage tests and standards, so that authors can use pre-built data or build it themselves.
7. Test mode: including tensile, bending, compressive, bending, adhesion, tearing, peeling, elongation, etc. settings.
8. Control mode: fixed displacement, constant speed, constant strain rate, constant load, constant load rate, constant stress rate, stress rate, etc.
9. Convenient and practical zero-setting function: force, elongation, and displacement can be manually zeroed by pressing a button, and it has the function of automatic zero-setting when the test starts.
10. Dynamic display: During the test, the load, elongation, displacement and the selected test curve will be dynamically displayed on the main control screen in real time as the test progresses.
11. Peak hold: During the whole process of the test, the maximum value of the test item is always displayed on the screen window along with the progress of the test.
12. Manual point picking function: it has a special manual point picking function during the test process.
13. Automatic discrimination: After the sample is damaged, the system automatically recognizes and switches to complete the next function according to the expected test requirements.
14. Automatic storage: test conditions, test results, and gauge length positions are automatically stored.
15. Automatic return: It has the function of automatically returning to the original point of the test after the test is completed.
16. Graphical analysis: After the test is completed, the data can be viewed from the test curve with the mouse, and any point on the test curve can be partially enlarged and analyzed, and can be selected for printing.
17. Curve comparison: The curves of the same group of samples can be superimposed and compared.
18. Report output: Graphics and parameters are open to customers to modify according to needs. Different report formats can be output, which is convenient, easy to learn and practical.
19. Range expansion function: sensors, extensometers and fixtures of different capacity specifications can be added to broaden the measurement range, so as to achieve more accurate test accuracy.
20. Automatic fault detection: When the servo system fails, it can automatically diagnose the cause of the fault and automatically store the code of the fault in the servo driver, so as to quickly find and eliminate the fault.
| 1. Load cell: 0.5-level high-precision force sensor 2. Capacity selection: 2KG, 5KG, 10KG, 20KG, 50KG, 100KG, 200KG, 500KG (selection) 3. Accuracy level: Level 1 4. Test force test range: 0.4%~100%FS 5. Power accuracy: within ±1% 6. Power resolution: 1/200000 7. Power magnification: X1, X2, X5, X10, X20, X50, X100 and other seven-speed full automatic shift switching 8. Error of indication value of displacement: ±1% of indication value 9. Displacement resolution: 0.005min 10. Deformation measurement range: 2%~100%FS 11. Error limit of deformation indication value: within ±0.5% of indication value 12. Large deformation measurement range: (10 ~ 1000) mm 13. Large deformation indication error limit: ±1% of indication 14. Large deformation resolution: 0.008mm 15. Control system: Japanese Panasonic servo controller 16. Transmission mode: Japanese Panasonic servo motor 17. Motor function: 0.4KW 18. Reduction device: Italy Outes precision hollow cast aluminum reducer 19. Transmission connecting plate: forged from high carbon steel, with good mechanical strength and no deformation 20. Transmission screw: Taiwan double-structure precision ball screw 21. Guide rod: It is made of two Φ50 Korean Taekyung guide rods, the surface is treated with high-frequency and hard chrome plating, and the HRC60 is above 22. Active bearing: Japan NSK high carbon ball bearing 23. Transmission system: Japanese high-strength timing belt 24. Body structure: separate design of main frame and control box 25. Test speed range: 0~500) mm/min 26. Speed accuracy: within ±1% of the indicated value 27. Test stroke (without fixture): 600mm 28. Fixture treatment: All fixtures are treated with hard chrome plating, above HRC55 29. Dust-proof device: Taiwan's anti-dust cover is used to protect the ball screw from dust, ensuring the life and accuracy of the ball screw 30. Body surface treatment: US DuPont powder, electrostatic spraying process, cured at a high temperature of 200 ºC to ensure long-term non-fading 31. Display system: Special software for material testing machine independently developed by HY-V based on win7 platform 32. Data transmission: 24bit data transmission is adopted. RS-232 data transmission, all parameters are stored on the peripheral hardware, and the computer does not need to install any external hardware, which is very convenient for users to replace and upgrade by themselves, and maintain the computer 33. Multiple protection devices: *Mechanical opening switch protects the upper and lower limit travel *Emergency emergency stop switch brake protection *Overcurrent, overvoltage, undercurrent, undervoltage, leakage overload protection *Software overload limit protection *Breakpoint shutdown protection 34. Volume: (500x400x1500) mm 35. Power supply: AC220V 50HZ 36. Weight: about 60kg |
1. Instrument manual.
2. Instrument warranty card
3. Third-party laboratory calibration report
4.Make a pair of fixtures
Founded in 2003, Hengyu Instrument is headquartered in Dongguan City, Guangdong Province. It is a national high-tech enterprise specializing in R&D and manufacturing of various quality testing instruments. Products are widely used in: national quality inspection and commodity inspection institutions, scientific research, colleges and universities, rubber and plastics, shoemaking, leather, textile, metal, luggage, stationery, baby carriages and other industries, for new product development, physical property testing, teaching The necessary equipment for research, quality control, and raw material inspection. The main products are tensile machine, tensile testing machine, universal material testing machine, universal tensile machine, shoe industry, luggage testing equipment, etc.
){kind=link}