Hy-939 Single Arm Computer Servo Control Tensile Testing Machine (Desktop Type)

• Warranty: 1 Years
• Maxcapacity: >1000KN
• Accuracy Grade: 0.5
• Loading Method: Dynamic Load
• Display: Digital
• Control: Computer Control
• Model NO.: HY-939
• Large Deformation Resolution: 0.008mm
• Control System: Servo Controller
• Transmission Mode: Servo Motor
• Motor Function: 0.4kw
• Specification: 500*400*1500mm

Product Description

Product Description

 

This testing machine is widely used in various materials such as rubber and plastic, footwear, leather, clothing, textiles, insulators, terminals, etc., to test its tensile, tearing, peeling, bending and other material development, inspection testing, It has complete functions and a wide range of uses.
Comply with: GB, ISO7500/1, JJG475-88, ASTME4, DIN5122, JISB7721/B7733, EN1002-2, BS1610, CNS9471/9470 and other national standards.
 

Product Parameters

1. Load cell: 0.5-level high-precision force sensor
2. Capacity selection: 2KG, 5KG, 10KG, 20KG, 50KG, 100KG, 200KG
3. Accuracy level: Level 1
4. Test force test range: 0.4%~100%FS
5. Power accuracy: within ±1%
6. Power resolution: 1/200000
7. Power magnification: X1, X2, X5, X10, X20, X50, X100 and other seven-speed full automatic shift switching
8. Error of indication value of displacement: ±1% of indication value
9. Displacement resolution: 0.005mm
10. Deformation measurement range: 2%~100%FS
11. Error limit of deformation indication value: within ±0.5% of indication value
12. Large deformation measurement range: (10 ~ 800) mm
13. Large deformation indication error limit: ±1% of indication
14. Large deformation resolution: 0.008mm
15. Control system: servo controller
16. Transmission mode: servo motor
17. Motor function: 0.4KW
18. Reduction device: Italy Outes precision hollow cast aluminum reducer
19. Transmission connecting plate: forged from high carbon steel, with good mechanical strength and no deformation
20. Transmission screw: Taiwan double-structure precision ball screw
21. Guide rod: It is made of two Φ30 Korean Taekyung guide rods, the surface is treated with high-frequency and hard chrome plating, and the HRC60 is above
22. Active bearing: Japan NSK high carbon ball bearing
23. Body structure: separate design of main frame and control box
24. Test speed range: (0.05~500)mm/min
25. Speed accuracy: within ±1% of the indicated value
26. Test stroke (without fixture): 600mm
27. Fixture treatment: All fixtures are treated with hard chrome plating, above HRC55
28. Dust-proof device: Taiwan anti-stack dust cover is used to protect the ball screw from dust and ensure the life and accuracy of the ball screw
29. Body surface treatment: US DuPont powder, electrostatic spraying process, cured at a high temperature of 200 ºC to ensure long-term non-fading
30. Display system: Special software for material testing machine independently developed by HY-V based on XP
31. Computer system: a set of brand computer + color inkjet printer
32. Data transmission: 16 bit data transmission is adopted. RS-232 data transmission, all parameters are stored on the peripheral hardware, and the computer does not need to install any external hardware, which is very convenient for users to replace and upgrade by themselves, and maintain the computer
33. Multiple protection devices:
1). Mechanical opening switch protection upper and lower limit travel
2).Emergency emergency stop switch brake protection
3). Overcurrent, overvoltage, undercurrent, undervoltage, leakage overload protection
4). Software overload limit protection
5). Breakpoint shutdown protection
6).Emergency braking can be performed in case of emergency
34. Active switch: Japan Sanling 30A, leakage protection switch
35. Volume: (500x400x1500) mm
36. Power supply: AC220V 50HZ
37. Weight: about 60kg

Features:
1. Software environment: HY-V software package under WindowsXP platform in Chinese and English
2. Language selection: Simplified Chinese, Traditional Chinese, English and other language interfaces can be switched freely during operation, which greatly facilitates the use of the operator
3. Unit conversion: commonly used forces, displacements, and energies are available and can be freely converted
4. Basic functions: can calculate and list data graphics: with basic parameters of material testing machine: 1). Yield point 2). 0.2%off set 3). Yield strength 4). Tensile strength 5). Elongation 6 ). Energy absorption 7). Maximum value 8). Fracture value 9). Deformation 10). Average value 11).
5. A variety of curve display modes: stress-strain, force-displacement, force-time, strength-time and other curve modes
6. Use of data: Use the database to manage tests and standards, so that the author can use pre-built data or build it by himself
7. Test mode: including tensile, bending, compression, bending, adhesion, tearing, peeling, elongation and elongation...etc.
8. Control mode: fixed displacement, constant speed, constant strain rate, constant load, constant load rate, constant stress rate, stress rate, etc.
9. Convenient and practical zero-setting function: force, elongation, and displacement can be manually zeroed by pressing a button, and it also has the function of automatic zero-setting when the test starts
10. Dynamic display: During the test, the load, elongation, displacement and the selected test curve will be dynamically displayed on the main control screen in real time as the test progresses.
11. Peak hold: During the whole process of the test, the maximum value of the test item is always displayed on the screen window following the progress of the test
12. Manual point taking function: it has a special manual point taking function during the test
13. Automatic discrimination: After the sample is damaged, the system automatically recognizes and automatically switches to complete the next function according to the expected test requirements
14. Automatic storage: automatic storage of test conditions, test results, and gauge length positions
15. Automatic return: It has the function of automatically returning to the test starting point after the test is completed.
16. Graphical analysis: After the test is completed, you can use the mouse to view the data from the test curve, and any point on the test curve can be partially enlarged and analyzed, and you can choose to print
17. Curve comparison: The curves of the same group of samples can be superimposed and compared.
18. Report output: Graphics and parameters are open to customers to modify according to needs. Different report formats can be output, which is convenient, easy to learn and practical.
19. Range expansion function: sensors, extensometers and fixtures of different capacity specifications can be added to broaden the measurement range, so as to achieve more accurate test accuracy
20. Automatic fault detection: When the servo system fails, it can automatically diagnose the cause of the fault and automatically store the code of the fault in the servo driver, so as to quickly find and eliminate the fault
Appendix:
1. Attach a pair of special fixtures according to your company's product requirements
2. A copy of the instrument operation manual
3. A warranty card for the instrument
4. An international third-party CNAS laboratory calibration report
5. A set of maintenance tools and a toolbox

Company Profile

 

Founded in 2003, Hengyu Instrument is headquartered in Dongguan City, Guangdong Province. It is a national high-tech enterprise specializing in R&D and manufacturing of various quality testing instruments. Products are widely used in: national quality inspection and commodity inspection institutions, scientific research,  colleges and universities, rubber and plastics, shoemaking, leather, textile, metal, luggage, stationery, baby carriages and other industries, for new product development, physical property testing, teaching The necessary equipment for research, quality control, and raw material inspection. The main products are tensile machine, tensile testing machine, universal material testing machine, universal tensile machine, shoe industry, luggage testing equipment, etc.