Temi2502 Digital Thermostat Humidity Controller

• Brand: Hengyu
• Two Control Methods: Program/Fixed Value
• Sensor Type: Two PT100 Inputs (Optional Electronic Sensor Input
• Output: Voltage Pulse (SSR) / Control Output: 2 Channels
• Control Signal: 16 Do Control Signals
• Alarm Signal: 16 Di External Fault Alarms
• Model NO.: TEMI2502
• Humidity Measurement Range: 1.0%--100%, Error ±1%
• Communication Interface: RS232/RS485
• Interface Language Type: Chinese/English
• Power Supply: 85-265V AC, 50/60Hz
• I/O Board Power Supply: DC 24V/600mA
• Installation Hole Size: 137×137cm
• Specification: 145× 145× 41mm

Product Description

Product Description

5.7-inch true color touch screen; two control methods: program/fixed value; sensor type: two PT100 inputs (optional electronic sensor input); output method: voltage pulse (SSR) / control output: 2 channels (temperature/ Humidity)/2-way 4-20mA analog output/16-way relay output (passive). Clear and intuitive display, strong three-dimensional sense, flexible and convenient operation of programmable control system, stable performance, more efficient work, flexible installation methods, and can be installed externally or embedded.

Product Parameters

 

1. 5.7-inch true color touch screen;
     2. Two control methods: program/fixed value;
     3. Sensor type: two PT100 inputs (optional electronic sensor input);
     4. Output: voltage pulse (SSR) / control output: 2 channels (temperature/humidity) / 2 channels 4-20mA analog output / 16 relay outputs (passive) / DO contact output:
    (1) T1-T8: 8 points (2) Internal contact IS: 8 points (3) Time signal: 4 points
    (4) Temperature RUN: 1 point (5) Humidity RUN: 1 point (6) Temperature UP: 1 point
    (7) Temperature DOWN: 1 point (8) Humidity UP: 1 point (9) Humidity DOWN: 1 point
    (10) Temperature Soak: 1 point (11) Humidity Soak: 1 point (12) Drain: 1 point
    (13) Failure: 1 point (14) Program end: 1 point (15) 1st Ref: 1 point
    (16) 2nd Ref: 1 point (17) Alarm: 4 points (optional alarm type)

     5. Control signal: 16 DO control signals;
     6. Alarm signal: 16 DI external fault alarms;
     7. Temperature measurement range: -90.0°C--200.0°C, (optional -90.0°C--300.0°C), error ±0.2°C;
     8. Humidity measurement range: 1.0%--100%, error ±1%;
     9. Communication interface: RS232/RS485;
     10. Interface language type: Chinese/English;
     11. It has the function of Chinese character input, edit and input manufacturer information, fault name, test name, etc., and the display is intuitive and clear;
     12. A variety of signal combination relay output, the signal can be logical operation (NOT, AND, OR, NOR, XOR);
     13. Diversified relay control methods: parameter -> relay mode, relay -> parameter mode, logical combination mode, composite signal mode;
     14. Program editing: 120 groups of programs can be edited, and each group of programs can be edited with a maximum of 100 segments, all groups are cycled, and segments are partially cycled;
     15. Curve: Real-time display of temperature and humidity PV and SV curves;
     16. With network function, IP address can be set, and the instrument can be controlled remotely;
     17. It can be equipped with a printer (USB function is optional);
     18. Power supply: 85-265V AC, 50/60Hz, I/O board power supply: DC 24V/600mA.

Specification:

Dimensions: 145×145×41(mm) (length×width×depth)
    Installation hole size: 137×137(mm) (length×width)